G Series modular portable power station

An expandable power station by design: start with a main base and battery module, then add stored energy, independent inverter channels and solar input as your RV, cabin, home battery backup or worksite plan grows.

Buy on SoreinPower
G7200 power station
7,200Wh3,300W / 6,600WG7200 configuration

Find the Best Modular Portable Power Station for Your Needs

G4800 G Series

Sorein G4800 Modular Power Station

$2,549

  • 4,800Wh | 3,300W
  • TT-30 30A shore-power outlet
  • Expandable to 9.6kWh
G7200 G Series

Sorein G7200 Modular Power Station

From$3,399

  • 7,200Wh | 3,300W / 6,600W
  • Add a 2nd 3,300W channel
  • Expandable to 9.6kWh

See how an expandable power station comes apart, and how it moves

Two short demos cover what the specification table cannot: a 2.4kWh module detached and stacked back on, every input and output on the base walked through one by one, then the trolley underneath — how the stack rolls on it and how the chassis comes off when the system has to be loaded or stored.

How a module detaches, and what every port does

The trolley underneath, and how it detaches

A modular power station adds runtime and output to the same base

A modular power station lets the system change with the job. Add battery modules when you need more hours, add inverter modules when you need more independently managed AC output, and keep the configuration grounded in the documented limits.

Four SOREIN G Series stacks at different heights, from a single main base to a full battery stack, with linked systems standing side by side
Runtime grows one battery module at a time; capacity grows by linking compatible systems. Named configurations run from 2.4kWh to 9.6kWh, and linked US configurations reach up to 55.2kWh.

Main base

The control center supplies the starting AC channel, AC charging, solar input and system controls.

Battery modules

Each compatible battery works as an expansion battery — an extra battery for the power station that adds 2.4kWh of stored energy, so runtime can grow without replacing the base.

Inverter modules

Each added inverter creates another independently managed AC output channel for configured high-demand loads.

Trolley

The matching mobile chassis keeps the assembled stack together when the system needs to move.

System range Named configurations run from 2.4kWh to 9.6kWh. Compatible linked US configurations can reach up to 55.2kWh and 16.5kW; capacity and output depend on the exact system plan.

What each G Series configuration includes

Capacity, AC output, the number of battery and inverter modules, and the job each one suits.

G Series modular power station configurations
ConfigurationCapacityAC outputMain baseBatteriesInvertersBest starting use
G24002,400Wh3,300W110Start with high output for focused backup and tools.
G48004,800Wh3,300W120Add stored energy for RV stays and cabins.
G7200 / G7200 Pro7,200Wh3,300W / 6,600W130 / 1Prioritize longer runtime; the Pro configuration adds a second AC channel.
G9600 Pro / G9600 Ultra9,600Wh6,600W / 9,900W141 / 2High power with long runtime; Ultra adds a third channel.

See the differences before you choose

Stack power. Scale freely. This stackable power station spans 2.4–9.6kWh in named configurations: add expansion batteries one at a time, or link multiple systems with compatible original factory cables for up to 55.2kWh and 16.5kW total output in the US specification; plan each inverter channel and installation separately.

How long can it power your setup?

Choose a model and enter the combined running watts. The table below applies the same estimate to four common loads.

Power station
Estimated runtime20.4 hr

2,400Wh × 85% ÷ 100W

3,300W. Motors, compressors and tools may need extra startup power; G Series loads must also fit within each inverter channel.
Estimated runtime at a steady listed load
ModelRefrigeration120W (hours)Work lights200W (hours)Water pump800W (hours)Cutoff saw2,200W (hours)
G24002,400Wh17.010.22.5< 1
G48004,800Wh34.020.45.11.9
G72007,200Wh51.030.67.72.8
G96009,600Wh68.040.810.23.7

Calculation method Usable capacity × 0.85 ÷ average load watts; the 0.85 factor covers typical conversion loss.

Planning estimate only. Real runtime shifts with device cycling, temperature, battery age and simultaneous loads.

Answers before you configure

Use the documented configuration, load and runtime limits to plan a system that can grow without guessing.

Read all technical answers
What is a modular power station?

It is a power system built from a main base, detachable battery modules and, on supported configurations, additional inverter modules. You can choose the starting capacity and expand the system as the load or runtime plan grows.

Does adding a battery increase output power?

Adding a battery increases stored energy and runtime. Output power increases only when the configuration supports additional inverter modules; the exact output depends on the regional model and connection plan.

Which G Series configuration is best for an RV?

G4800 is a practical starting point for RV refrigeration, connectivity and appliances between hookups. Choose G7200 when the same loads need to run longer, and pair the system with compatible solar input for daytime recovery.

Can I expand the system later?

Yes — the G Series is an expandable power station: start with a main base and battery modules, then add compatible expansion batteries or inverters within the documented configuration limits. Confirm the exact cable, order and regional compatibility in the user manual before expanding.

Can a G Series system run power tools?

Yes, when the tool's continuous and startup demand fit the selected inverter channel. The G7200 Pro and G9600 Ultra configurations add independent channels for configured high-draw tools; check the tool nameplate and startup demand before use.

Start with the load, then choose the battery